Testing a Power Supply

 On Senin, 31 Oktober 2011  

Have a power source that you might not know if this working properly and do not knowHow to Prove A power then we will explain here Testing a Power Supply . This test is to verify whether or not a source of power in a computer is good or in poor condition. First of all to Test a Power Supply not need large knowledge in a few simple steps we can check if a power supply is damaged. Likewise to say that sometimes the power supplies are damaged because on the inside have a fuse, this fuse is often burned normally and therefore also have to fail the power supplies feeding the computers . 




To Test A powerwe will need the following: 1. A piece of wire to pass current in both ends of the liner is free with which God protected. 2. A source of power. No more remind you that for this test should not have the font on their computers, this test is made ​​outside the PC, or is not installed on your computer. Steps Testing a Power Supply are the following: 1.Connect the power cord to the power to have power source. 2. With the jumper the green wire and black wire connector 20 or 24 pin power source is connected to the motherboard of the computer. If they see that the fan on the power tour, then we can verify that the power supply is good. I hope you learn this help, and good when you want to prove a source of power and know how. 
Testing a Power Supply 4.5 5 Unknown Senin, 31 Oktober 2011 Have a power source that you might not know if this working properly and do not know How to Prove A power  then we will explain here  Testin...


Tidak ada komentar:

Posting Komentar